DUBAI MARINA MALL

dubai-marina

Exhibiting a distinctive architectural style with a circularatrium that makes effective use of the waterfront location, the Dubai Marina Mall, with its objective of being a one-stop destination for shopping, restaurants and entertainment covers an area of 42,000 so m including parking space, and is designed for the convenience of the residents of Dubai Marina and visitors.

serie-3m

3 – 3L SERIES
Standardised centrifugal electric pumps

  • Maximum working pressure: 10 bar
  • Maximum temperature of the liquid:
    -10°C ÷ +90°C
    -10°C ÷ +110°C (L-H-HS-HW-HSW-E versions)
    -10°C ÷ +120°C (ES version)
  • MEI >0,4 for 3(L) SERIES 2 poles, MEI >0,1 for 3(L) SERIES 4 poles
  • High efficiency IE2 motors starting from 0,75kW
  • Self-ventilated 2 and 4 poles asynchronous motor
  • Class of insulation F (B for high temperatures)
  • IP55 protection degree
  • 230V ±10% single phase voltage, 50Hz,
  • 220-240/380-415V ±5% (up to 0,55kW included) three phase voltage,
    50Hz for 3(L)M4 SERIES,
  • 230/400V ±10% (from 0,75kW to 4kW included) three phase voltage,
    50Hz for 3(L)M4 SERIES,
    230/400V ±10% (up to 4kW included) three phase voltage, 50Hz for
    the rest of the range
  • 400/690V ±10% (from 5,5 kW and above) three phase voltage, 50Hz
  • Protection is user’s responsibility
  • Pump casing and casing cover in:
    – AISI 304 for 3 SERIES 32-125/160/200, 40-125/160/200, 50-125/160,
    65-125/160/200
    – AISI 316L for 3L SERIES 32-125/160/200, 40-125/160/200, 50-
    125/160, 65-125/160/200
    – AISI 316 microcasted for 3L SERIES 65-250, 80-160/200/250
    • Impeller in:
    – AISI 304 for 3 SERIES 32-125/160/200, 40-125/160/200, 50-125/160
    – AISI 316L for 3L SERIES 32-125/160/200, 40-125/160/200, 50-125/160
    – AISI 316 microcasted for 3 SERIES 65-125/160/200, 3L SERIES 65-
    125/160/200, 65-250, 80-160/200/250
  • Mechanical seal standard in:
    – Carbon/Ceramic/NBR for 3 SERIES 32-125/160/200, 40-125/160/200,
    50-125/160, 65-125/160/200
    – SiC/SiC/FPM for 3L SERIES 32-125/160/200, 40-125/160/200, 50-
    125/160, 65-125/160/200/250, 80-160/200/250
    – Special mechanical seals available on request
EVMSG

EVM
Vertical multistage centrifugal electric pumps

  • Maximum working pressure: 16 bar, 25 bar,
    30 bar for EVM32 – EVM45 only
  • Temperature of the liquid: from -15°C to +120°C
  • Maximum solid content: 50 ppm (particle size 0,1-0,25 mm or less)
  • Maximum chlorine ion density: 500 ppm
  • MEI > 0,4
    For further information please see our Data Book on the web site
    www.ebaraeurope.com
  • High efficiency IE2 motors starting from 0,75kW
  • Self-ventilated 2 poles asynchronous motor
  • Class of insulation F
  • IP55 Protection degree
  • Single phase voltage 230V ±10% 50Hz,
    three phase voltage 230/400V ±10%, 50Hz (up to 4 kW included),
    three phase voltage 400/690V ±10% (5.5 kW and above)
    • Circuit breaker protection under user’s responsibility

Lower pump body, external casing, seal housing disc, impellers,
diffusers, shaft casing, joint cover and small elements in contact with
the liquid in AISI 304 (EVM), AISI 316 (EVML) [“EVMG” version: pump
casing in cast iron and hydraulic part in AISI 304]

  • Tie-rods and small elements not in contact with the liquid in galvanised
    steel
  • Shaft in AISI 316
  • Bearings in contact with the liquid in tungsten carbide
  • Motor bracket in cast iron (EVMG), in cast iron/AISI 304 (EVM), in cast
    iron/AISI 316
  • Mechanical seal in SiC/Carbon/EPDM (EVM-EVMG 3-5-10-18)
  • Mechanical seal in SiC/Carbon/FPM (EVML 3-5-10-18)
  • Mechanical seal with cartridge as per standard in SiC/Carbon/FPM
    (models 32-45-64) (F= round counterflanges; N= oval counterflanges)
  • Liner rings in PTFE

FHA/FSA
Centrifugal pumps

  • Type of liquid: clean water, light chemical treatment
  • Maximum working pressure: 16 bar
  • Temperature of the liquid: 0°C ÷ +80°C (standard)
    -20°C ÷ +120°C (high temperature version)
  • Suction and discharge connection: – DIN PN16 (standard)
    – JIS 16K; ANSI 250 (high temperature version)
  • MEI > 0,1 (FHA)
  • High efficiency IE2 motors starting from 0,75kW
  • Various supplier for motors
  • Self-ventilated 2 and 4 pole asynchronous motor
  • Class of insulation F (B for high tempertaures)
  • IP 55 protection rating
  • 230/400V ±10% (up to 4 kW included) 50Hz three phase voltage,
    400/690V ±10% (from 5,5 kW and over) 50Hz three phase voltage
  • Casing in cast iron
  • Impeller in bronze
  • Shaft in AISI 403
  • Mechanical seal in:
    – Ceramic/Carbon/NBR (standard)
    – SiC/Carbon/EPDM (high temperature version)

EBARA is a trusted brand worldwide with its experience and superior technologies.