GREEN COMMUNITY VILLAS

green-villas

Project: Green Community Villas
Year: 2007-2009
City: Dubai, UAE
Client: EDARA
Contractor: Alphanoor Electromechanical Works
Consultant: Khatib & Alami
Products: EBARA Transfer & Booster Pump Sets
Focus: CDX
Spread out over an area of 67 hectares, Dubai’s Green Community includes residential, leisure, retail, and commercial facilities in a significantly traffic-free environment. The development prides itself in its contemporary architecture set within attractive landscapes and whose overall aim is designed to promote peace of mind and convenience.

EVMSG

EVM
Vertical multistage centrifugal electric pumps

  • Maximum working pressure: 16 bar, 25 bar,
    30 bar for EVM32 – EVM45 only
  • Temperature of the liquid: from -15°C to +120°C
  • Maximum solid content: 50 ppm (particle size 0,1-0,25 mm or less)
  • Maximum chlorine ion density: 500 ppm
  • MEI > 0,4
    For further information please see our Data Book on the web site
    www.ebaraeurope.com
  • High efficiency IE2 motors starting from 0,75kW
  • Self-ventilated 2 poles asynchronous motor
  • Class of insulation F
  • IP55 Protection degree
  • Single phase voltage 230V ±10% 50Hz,
    three phase voltage 230/400V ±10%, 50Hz (up to 4 kW included),
    three phase voltage 400/690V ±10% (5.5 kW and above)
    • Circuit breaker protection under user’s responsibility

Lower pump body, external casing, seal housing disc, impellers,
diffusers, shaft casing, joint cover and small elements in contact with
the liquid in AISI 304 (EVM), AISI 316 (EVML) [“EVMG” version: pump
casing in cast iron and hydraulic part in AISI 304]

  • Tie-rods and small elements not in contact with the liquid in galvanised
    steel
  • Shaft in AISI 316
  • Bearings in contact with the liquid in tungsten carbide
  • Motor bracket in cast iron (EVMG), in cast iron/AISI 304 (EVM), in cast
    iron/AISI 316
  • Mechanical seal in SiC/Carbon/EPDM (EVM-EVMG 3-5-10-18)
  • Mechanical seal in SiC/Carbon/FPM (EVML 3-5-10-18)
  • Mechanical seal with cartridge as per standard in SiC/Carbon/FPM
    (models 32-45-64) (F= round counterflanges; N= oval counterflanges)
  • Liner rings in PTFE

CDX
Single impeller centrifugal electric pumps

  • Maximum working pressure: 8 bar
  • Maximum temperature of the liquid:
    -5°C ÷ +60°C for CDX 70/05-70/07-90/10
    -5°C ÷ +90°C for the rest of CDX range
    -5°C ÷ +110°C in the H-HS-HW-HSW-E version
  • G1½ suction connection for CDX 200, G1¼ for the rest of the range
  • G1 discharge connection
  • MEI > 0,1
  • High efficiency IE2 motors starting from 0,75kW
  • Self-ventilated 2 pole asynchronous motor
  • Class of insulation F
  • IP55 Protection degree
  • 230V ±10%, 50Hz single phase voltage
    230/400V ±10%, 50Hz three phase voltage
  • Permanent capacitor inserted and thermo-amperometric protection
    with automatic rearm incorporated for the single phase motor
  • Protection under user’s responsibility for the three phase version
  • Pump casing, impeller, diffuser and casing cover in AISI 304
  • Shaft in AISI 303 (part in contact with the liquid)
  • Bracket and motor frame in aluminium
  • Mechanical seal in:
    – Ceramic/Carbon/NBR (standard)
    – Ceramic/Carbon/FPM (H version)
    – SiC/SiC/FPM (HS version)
    – Tungsten Carbide/Tungsten Carbide/FPM (HW version)
    – SiC/Tungsten Carbide/FPM (HSW version)
    – Ceramic/Graphite/EPDM (E version)
    – Tungsten Carbide/Special Carbon/EPDM (U3CEGG version)
    CDX
    Single impeller centrifugal electric pumps

EBARA is a trusted brand worldwide with its experience and superior technologies.