JUMEIRAH LAKES TOWER

lake-towers

Jumeirah Lakes Towers facing the buildings of Dubai Marina, and also one of Dubai’s more size able developments, consists of approximately 80 towers built around four artificial lakes. The total area covered by the lakes, waterways and landscaping is, again approximately, 730.000 square meters. All residential towers lie in clusters of three, which makes them easier to find.

serie-3m

3 – 3L SERIES
Standardised centrifugal electric pumps

  • Maximum working pressure: 10 bar
  • Maximum temperature of the liquid:
    -10°C ÷ +90°C
    -10°C ÷ +110°C (L-H-HS-HW-HSW-E versions)
    -10°C ÷ +120°C (ES version)
  • MEI >0,4 for 3(L) SERIES 2 poles, MEI >0,1 for 3(L) SERIES 4 poles
  • High efficiency IE2 motors starting from 0,75kW
  • Self-ventilated 2 and 4 poles asynchronous motor
  • Class of insulation F (B for high temperatures)
  • IP55 protection degree
  • 230V ±10% single phase voltage, 50Hz,
  • 220-240/380-415V ±5% (up to 0,55kW included) three phase voltage,
    50Hz for 3(L)M4 SERIES,
  • 230/400V ±10% (from 0,75kW to 4kW included) three phase voltage,
    50Hz for 3(L)M4 SERIES,
    230/400V ±10% (up to 4kW included) three phase voltage, 50Hz for
    the rest of the range
  • 400/690V ±10% (from 5,5 kW and above) three phase voltage, 50Hz
  • Protection is user’s responsibility
  • Pump casing and casing cover in:
    – AISI 304 for 3 SERIES 32-125/160/200, 40-125/160/200, 50-125/160,
    65-125/160/200
    – AISI 316L for 3L SERIES 32-125/160/200, 40-125/160/200, 50-
    125/160, 65-125/160/200
    – AISI 316 microcasted for 3L SERIES 65-250, 80-160/200/250
    • Impeller in:
    – AISI 304 for 3 SERIES 32-125/160/200, 40-125/160/200, 50-125/160
    – AISI 316L for 3L SERIES 32-125/160/200, 40-125/160/200, 50-125/160
    – AISI 316 microcasted for 3 SERIES 65-125/160/200, 3L SERIES 65-
    125/160/200, 65-250, 80-160/200/250
  • Mechanical seal standard in:
    – Carbon/Ceramic/NBR for 3 SERIES 32-125/160/200, 40-125/160/200,
    50-125/160, 65-125/160/200
    – SiC/SiC/FPM for 3L SERIES 32-125/160/200, 40-125/160/200, 50-
    125/160, 65-125/160/200/250, 80-160/200/250
    – Special mechanical seals available on request
EVMSG

EVM
Vertical multistage centrifugal electric pumps

  • Maximum working pressure: 16 bar, 25 bar,
    30 bar for EVM32 – EVM45 only
  • Temperature of the liquid: from -15°C to +120°C
  • Maximum solid content: 50 ppm (particle size 0,1-0,25 mm or less)
  • Maximum chlorine ion density: 500 ppm
  • MEI > 0,4
    For further information please see our Data Book on the web site
    www.ebaraeurope.com
  • High efficiency IE2 motors starting from 0,75kW
  • Self-ventilated 2 poles asynchronous motor
  • Class of insulation F
  • IP55 Protection degree
  • Single phase voltage 230V ±10% 50Hz,
    three phase voltage 230/400V ±10%, 50Hz (up to 4 kW included),
    three phase voltage 400/690V ±10% (5.5 kW and above)
    • Circuit breaker protection under user’s responsibility

Lower pump body, external casing, seal housing disc, impellers,
diffusers, shaft casing, joint cover and small elements in contact with
the liquid in AISI 304 (EVM), AISI 316 (EVML) [“EVMG” version: pump
casing in cast iron and hydraulic part in AISI 304]

  • Tie-rods and small elements not in contact with the liquid in galvanised
    steel
  • Shaft in AISI 316
  • Bearings in contact with the liquid in tungsten carbide
  • Motor bracket in cast iron (EVMG), in cast iron/AISI 304 (EVM), in cast
    iron/AISI 316
  • Mechanical seal in SiC/Carbon/EPDM (EVM-EVMG 3-5-10-18)
  • Mechanical seal in SiC/Carbon/FPM (EVML 3-5-10-18)
  • Mechanical seal with cartridge as per standard in SiC/Carbon/FPM
    (models 32-45-64) (F= round counterflanges; N= oval counterflanges)
  • Liner rings in PTFE

DL – DL W/C
Submersible sewage pumps (DL) with cutter (DL W/C)

  • Maximum temperature of the liquid: 40°C
  • Max solids size for passage:
    46 mm (65DL, 65DL W/C)
    46 mm (80DL, all DLC, 80 DL W/C)
    57 mm (100DL, 100DLB, 100DL W/C, 100DLB W/C)
    68 mm (150DL up to 22kW)
    73 mm (200DL up to 22kW)
    76 mm (all models 30÷45 kW)
    79 mm (250DL up to 22kW)
    88 mm (300DL up to 22kW)
  • Max fibers lenght:
    195 mm (65DL, 65DL W/C)
    240 mm (80DL, all DLC, 80DL W/C)
    300 mm (100DL, 100DLB, 100DL W/C)
    400 mm (150DL from 5.5 kW up to 45 kW)
    500 mm (200DL up to 45 kW)
    500 mm (all models 30÷44 kW)
    550 mm (250DL up to 45 kW)
    600 mm (300DL up to 45 kW)
  • 4 poles motor
  • Insulation class F
  • Degree protection IP68
  • 380-415V ±10%, 50Hz (1,5÷7,5kW) (DL and DL W/C) three phase voltage
    400-415V ±10%, 50Hz (connection 11÷22 kW) (DL) three phase voltage
    380-415V ±10%, 50Hz (connection 30÷45 kW) (DL) three phase voltage
  • Flanges: DN65, DN80, DN100, DN150, DN200, DN250, DN300 (DL),
    DN65, DN80, DN100 (DL W/C)
  • Power up to 45 kW (DL), up to 7.5 kW (DL W/C)
  • Pump body, impeller (DL), elbow in cast iron
  • Shaft in AISI 403
  • Mechanical seal: SiC/SiC/NBR (pump side),
    Carbon/Ceramic/NBR (motor side)
    DL – DL W/C
    Submersible sewage pumps (DL) with cutter (DL W/C)

EBARA is a trusted brand worldwide with its experience and superior technologies.