SERVOPRESSControl systems and panels

SERVOPRESS
DEVICE FOR PUMP CONTROL AND PROTECTION
  • It allows the pump restart pressure to be set (only for the SERVOPRESS LP SET and LP SET M models)
  • It starts and stops the pump according to how the user units are turned on or off.
  • It stops the pump if the water level is low and protects it against dry running
  • It features automatic re-arm in the event of locking and an anti-lock function.
  • It can be mounted on surface pumps and submersible pumps

SERVOPRESS LP

  • Two versions available with restart pressure fixed at 1.5 or 2.2 bar
  • Single phase line voltage – 115 V AC/230 V A
  • Protection rating IP 65
  • Acceptable voltage variation +/-10%
  • Working pressure max 12 bar
  • Frequency 50-60 Hz
  • Max operating temperature 65°C
  • Max current 10 A
  • Minimum flow ~ 1 l/min
  • Max power 0.75 kW (1 HP) – 1.5 kW (2 HP)
  • GC 1” nipples
  • Pressure gauge available as separate accessory

SERVOPRESS LP SET (M)

  • Restart pressure can be selected on display (1.5 – 2 – 2.5 bar)
  • Single phase line voltage 230 V
  • Protection rating IP 65
  • Acceptable voltage variation +/-10%
  • Working pressure max 12 bar
  • Frequency 50-60 Hz
  • Max operating temperature 65°C
  • Max current 10 A
  • Minimum flow ~ 1 l/min
  • Power 1.5 kW (2 HP)
  • GC 1” nipples
  • Also available with pressure gauge installed as standard

EBARA is a trusted brand worldwide with its experience and superior technologies.