Submersible pump with single channel or vortex type impeller
- Evacuation of civil and industrial waste water
- Drying wells and excavations
- Draining underground areas
- Handling fluids containing suspended solids / filaments
- Draining infiltration water
- Handling foul waste water (domestic services)
- Draining cesspits
- Fitted with 10 m power cable, type H07 RN-F (single phase), type
FG50K (three-phase) - Available with/without float switch
- Equipped with single-channel or vortex impeller (VOX) and flanged (F)
- Maximum submersion: 7 m
- Maximum fluid temperature: 40°C
- Maximum solid dimensions: 50 mm
- 2 pole self-ventilating asynchronous motors
- Insulation class F
- Protection rating IPX8
- Single phase voltage 230V ±10%, 50Hz,
three-phase voltage 400V ±10%, 50Hz - Permanently active condenser and integrated automatic re-arming
thermal cutout for the single phase motor - Protection must be supplied by the user for the three-phase version
- Threaded version: suction ø 50, delivery G2
- Flanged version: delivery ø 50 DN 50
- Pump body, impeller, motor cover, gasket disk and motor casing in
AISI 304 stainless steel - Shaft made of AISI 303 stainless steel
- Double mechanical seal with oil chamber:
– upper seal in Carbon/Ceramic/NBR (motor side)
– lower seal in SiC/SiC/NBR (pump side) - Spacer in G20 cast iron (DW-DW VOX 300 only)
